Hail Season in north texas: Roofing Guide for Homes & Businesses
If you live or work in North TX, you already know the drill- blue-sky mornings can turn into hail and high winds by afternoon. Between spring supercells and late-summer storms, your roof takes a beating. This guide covers exactly how to prepare, what to look for after a storm, and the best roofing options for North Texas homes and flat/low-slope commercial roofs in Flower Mound, Lewisville, Highland Village, Coppell, and Grapevine.
Why Flower Mound Roofs Take Unique Damage
The Dallas–Fort Worth storm corridor brings:
Large hail + wind-borne debris that bruise shingles and puncture membranes
Thermal swings that stress sealants and flashing
UV intensity that accelerates aging—especially on older roofs
Result: hidden leaks, premature wear, and energy loss if you don’t act quickly.
Pre-Storm Prep: 9 To-Dos Before the Skies Turn
Document your roof today: snap clear photos of shingles, vents, skylights, and flashing.
Trim limbs overhanging the roofline.
Clean gutters & downspouts to prevent water back-ups.
Check attic ventilation (baffles, soffits) to limit heat buildup.
Seal penetrations (pipe boots, satellite mounts).
Secure rooftop equipment on commercial buildings (curbs, RTUs).
Verify insurance details (deductible, claims window, exclusions).
Create a storm folder: policy PDF, roofer contact, today’s photos, serial numbers for rooftop HVAC.
Schedule a baseline inspection—small fixes now prevent big losses later.
After the Storm: What to Check (Without Climbing)
Ground clues: shingle granules at downspout exits, metal dents on gutters/garage doors, shredded window screens.
Ceiling/attic: new water spots, musty smell, visible daylight around penetrations.
Driveway debris: shingle tabs, ridge cap fragments.
Flat/low-slope: ponding water, loose edge metal, torn membranes.
Pro tip: hail damage can be invisible from the street. Impact bruises don’t always show until leaks appear months later.
Best Roofing Options for North Texas (Residential)
Impact-Resistant Asphalt (Class 4):
Tough against hail, widely available, attractive profiles.
Look for Class 4 impact rating and high wind ratings.
Add synthetic underlayment + ice & water shield at valleys/edges for extra defense.
Stone-Coated Steel or Standing-Seam Metal:
Excellent hail/wind performance; long lifespan.
Consider sound-deadening underlayment and proper gauge.
Designer/Polymer Shakes/Slates (IR-rated):
Curb appeal with upgraded impact resistance.
Best Roofing Options for Local Businesses (Commercial/Industrial)
TPO (Thermoplastic Polyolefin):
Highly reflective for energy savings in North Texas heat
Heat-welded seams, strong against uplift
Great for offices, retail, warehouses in Flower Mound/Lewisville
PVC:
Chemical resistance (ideal for restaurants/light industrial)
Comparable reflectivity benefits
Coatings (Silicone/Acrylic/PU):
Extend life of aging TPO/modified roofs if substrate is sound
Fast application, minimal downtime, improved reflectivity
Metal (with foam closure & proper fastening):
Long life, strong wind ratings—ensure details at penetrations are airtight
The Leak Triangle: Where Most Failures Start
Penetrations: pipe boots, skylights, vents, HVAC curbs
Transitions: walls-to-roof, valleys, step flashing
Perimeter: drip edges, coping, parapets
A quality installation + routine maintenance keeps these three zones tight.
Insurance 101 (Practical, Not Legal Advice)
Document immediately: time-stamped photos/video of roof, gutters, fences, AC fins.
Call your roofer first for a storm report and detailed inspection (including a written scope with photos).
Contact your insurer promptly per your policy; keep notes of dates/times.
Meet adjuster with your roofer so damage is properly identified the first time.
Save receipts for emergency dry-in or tarping.
When Repair Beats Replacement - and When It Doesn’t
Repair small, localized issues (a few shingles, a vent boot, sealant failures).
Replace when hail bruising is widespread, granule loss is severe, or the membrane/shingles are at end of life.
Re-cover or coat flat roofs if the deck is sound and moisture scans look good.
FAQs
Q: How do I know if hail damaged my roof?
A: You might not—many impacts are subtle. Schedule a professional inspection that includes photos and a written assessment.
Q: How long does a TPO roof last in North Texas?
A: With proper installation and maintenance, 20–30 years is common, and coatings can extend service life on qualifying systems.
Q: Are impact-resistant shingles worth it in Flower Mound?
A: Yes. They often reduce storm damage risk and can help with longevity; some insurers may offer incentives (check your policy).
Q: Can I coat any flat roof after a storm?
A: Only if the substrate is dry and structurally sound. A moisture scan and adhesion tests determine eligibility.
Get a Free Roof Inspection in North Texas
Whether you need a hail assessment, a Class 4 shingle upgrade, or a TPO repair/coating for your commercial property, we’re here to help.
Serving: Flower Mound, Lewisville, Highland Village, Coppell, Grapevine, and surrounding North Texas communities.
